100% PROUDLY MADE IN THE USA | 13 FOR: This versatile furnace meet the needs of a variety of metal casters, high and low pressure die casters, and permanent mold, sand, investment and lost foam foundries around the world. OPERATION & MAINTENANCE: Quick changeover as the crucible can be replaced in 1-2 hours while the furnace remains in place. Transfer Ladles & Ladle Heaters Our powered transfer ladles and ladle heaters can make light work of your foundry transport operations. We can provide custom ladles designed to fit specific needs with a range of: power options, barrel designs, single or multiple spout designs, and transport options. Schaefer’s Heatflow Program is designed to show energy cost savings using a specialized flexliner that will: • Ensure lower metal temperature loss during transport • Reduce thermal head temperatures necessary in aluminum melt furnaces • Reduce time and energy requirements to attain metal temperature in the holding furnaces • Reduce lining maintenance by reducing thermal spalling The powered transfer ladles shown are just a couple of the many designs available from Schaefer. We can provide standard ladle sizes including: 1,000 lb (453.6 kg), 1,500 lb (680.4kg), or 2,000 lb (907.2 kg) holding capacities of molten aluminum, or we can custom build a ladle for aluminum, zinc, or other metal transport. We can provide a variety of forklifts, truck transporters or monorails to carry molten metal transfer ladles, with open tops and single or double pour spouts. ADVANTAGES: • Rugged designs — for a long production life. • Designed with simplicity — for easy operation. • Heavy-duty construction — long lasting in a production environment. LADLE PRE-HEATERS Schaefer ladle pre-heaters are designed according to the size of the ladle and the alloy you are heating. Steel requires a higher input versus aluminum. • Typical burner ratings range: 100,000BTU’s to 1,750,000 BTU’s • Regulated gas supply: ½ lb to 1lb • Air supply required to tilt the burner into the ladle: regulated at 60 p.s.i. at 10 c.f.m. • Power supply: 120V AC @ 30 amps FOR: This versatile furnace meet the needs of a variety of metal casters, high and low pressure die casters, and permanent mold, sand, investment and lost foam foundries around the world. OPTIONS: • Power options • Barrel designs • Single or multiple spout designs • Transport options
RkJQdWJsaXNoZXIy NDI4Njg=